|
OpenRISC 1000: Silicon
Silicon Implementations
Several companies are making silicon implementations (ASICs) of OR1200 using different library vendors and foundaries, process geometries from 0.35um to 0.13um.
Here is an example of System-On-Chip (SOC) from Flextronics. It is a 32-bit general-purpose microcontroller implemented on 0.18um targetting embedded applications with maximum clock frequency of 160MHz. The SOC features:
The OR1200 is implemented with 8KB instruction and 8KB data caches, I/DMMU with 64 TLB entries each, power management unit, debug unit, tick timer and interrupt controller. Its 32x32 multiplier is coupled with a 64-bit MAC unit.
Test board for testing the SOC has 64MBytes of SDRAM, 32MBytes of FLASH, RS232 transceiver, Ethernet 10/100 PHY. Connectors are for RS232, Ethernet, JTAG/Debug and several Mictor logic analyzer connectors. The board has its own DC/DC regulators for 3.3V IO power supply and 1.8V core power supply. It can be used as stand alone board or as PCI standard form plugin board.
Software running on the SOC is Embedded Microcontroller Linux (uClinux) with a console on serial RS232. The console shows a network ping to a local network host - the ping shows the Ethernet 10/100 capability.
This board was the first prototype built (not fully assembled at the time)
Dynamic power of the entire test board is 1.4W. Dynamic current of the SOC IO power supply is 52mA (3.3V) and dynamic current of the SOC Core power supply is 86mA (1.8V). These are nominal values measured at 100MHz system clock.
Maximum system clock frequency of the SOC is 160 MHz. System clock is used to clock not only the OR1200 processor but the entire chip (exception is memory controller which can also run at 1/2 system clock). Max system clock 160MHz was obtained at 25C ambient temperature, 3.3V IO and 1.8V core.
|
Browse
