IP Core for FPGA Configuration Controller from MMC Card. Can configure an FPGA in serial mode from continous blocks stored on MMC Card. Smallest version of the IP Core only needs 21 PLD Macrocells.
Features
FPGA Configuration modes supported
Master Serial (Xilinx) > FPGA tested
Slave Serial
Small Size
Minimal Core is 20 CoolRunner PLD-Macrocells
Removable Media for Bitstream Storage
MMC Cards are supported (no SD-Cards!)
Status
Xilinx Master Serial mode support tested with real HW (XC9536XL as config controller configuring VP20)
Copyright (c) 1999
OPENCORES.ORG. All rights reserved.