|
Message
From: me75 at hotmail.com<me75@h...>
Date: Wed Jul 9 16:44:08 CEST 2008
Subject: [oc] LPC Bus Interface
Mind lending me your eyes for a while?
my codes is here http://www.savefile.com/files/1655664
Im not sure if it is my sampling that is wrong or my fifo or is it my
uart. I ran on modelsim my sampling+fifo..and the output of fifo is
right. I ran my uart on it's own and it's able to transmit.
But i'm having problem simulating all of them together...
----- Original Message -----
From: Mark McDougall<markm@v...>
To:
Date: Wed Jul 9 07:35:44 CEST 2008
Subject: [oc] LPC Bus Interface
> ahsoon wrote:
>
> > Im trying to make one to tap the keyboard's traffic. I'm using
> the LPC
> > 33Mhz clock to do the processing. Managed to get something
> from there,
> > but it doesnt seem right.
> >
> > My LFRAME never seems to be activated no matter what I do.
> Anyone has
> > any idea?
> I can't really help you much, other than to say what you're
> attempting
> should be doable. I had success with a VHDL module to tap the LPC
> bus for
> firmware reads, driven off the LPC clock.
> Regards,
> --
> Mark McDougall, Engineer
> Virtual Logic Pty Ltd, <http://www.vl.com.au>
> 21-25 King St, Rockdale, 2216
> Ph: +612-9599-3255 Fax: +612-9599-3266
>
>
|
 |
Browse
