Message

Reply | Reply all

Date Prev | Date Next | Thread Prev | Thread Next Date Index | Thread Index

From: darkcurrent11 at yahoo.com<darkcurrent11@y...>
Date: Tue Jul 1 04:47:06 CEST 2008
Subject: [oc] to install jop in spartan 3e

I encountered a very similar situation a couple of days ago. The
solution was to follow the clue in the error message: "a missing edif
or ngc file".

I had generated the core in a folder different from where I was using
the coregen VHDL file. So I had to go to the folder where I had
generated the core and copy the *.ngc file from there and drop it into
the same folder as where I was performing synthesis and translation.
And Voila! that worked!

Hope you have luck with that solution.

-Dark Current


----- Original Message -----
From: peppe_dibella at virgilio.it<peppe_dibella@v...>
To:
Date: Wed Jun 25 17:45:47 CEST 2008
Subject: [oc] to install jop in spartan 3e

> Hi,
> my name is Giuseppe, I'm a student of the University of Catania in
> Italy.
> I installed IDE 9.2i and I have to install JOP in Spartan 3e. At
> the stage
> of mapping the erro messages are:
> NgdBuild:604 - logical block
> 'cpm_cpu_cmp_core_cmp_stk_cmp_ram_cmp_xram_block' with
> type 'xram_block'
> could not be resolved. A pin name misspelling can cause this, a
> missing edif
> or ngc file, or the misspelling of a type name. Symbol
> 'xram_block' is
> not
> supported in target 'spartan3'.
> ERROR:NgdBuild:604 - logical
> block 'cpm_cpu_cmp_core_cmp_fch_cmp_rom' with type
> 'rom' could not be resolved. A pin name misspelling can cause
> this, a
> missing
> edif or ngc file, or the misspelling of a type name. Symbol 'rom'
> is not
> supported in target 'spartan3'.
> ERROR:NgdBuild:604 - logical
> block 'cpm_cpu_cmp_core_cmp_fch_cmp_off' with type
> 'offtbl' could not be resolved. A pin name misspelling can cause
> this, a
> missing edif or ngc file, or the misspelling of a type name.
> Symbol 'offtbl'
> is not supported in target 'spartan3'.
> ERROR:NgdBuild:604 - logical
> block 'cpm_cpu_cmp_core_cmp_bcf_cmp_jtbl' with type
> 'jtbl' could not be resolved. A pin name misspelling can cause
> this, a
> missing edif or ngc file, or the misspelling of a type name.
> Symbol 'jtbl'
> is
> not supported in target 'spartan3'.
> Partition Implementation Status
> -------------------------------
> No Partitions were found in this design.
> -------------------------------
> NGDBUILD Design Results Summary:
> Number of errors: 4
> Number of warnings: 0
> One or more errors were found during NGDBUILD. No NGD file will be
> written.
> Writing NGDBUILD log file "jop.bld"...
> Process "Translate" failed
> I read "An Introduction to the Design Flow for JOP", but
> for my bad
> English I could not understand the error.
> Thanks to whoever can help me
> Giuseppe
>
>