|
Message
From: Fabrizio Fazzino<fabrizio@f...>
Date: Sun May 28 12:33:58 CEST 2006
Subject: [oc] Development board for OpenSPARC
Chris Palmer wrote:
>
> I'm guessing that the part you specified (suffix of "200") is the
> smallest in the family that will support the SPARC core. There might be
> dev boards with the larger sized chips in that same Virtex family. I'd
> start at Xilinx's site and browse the dev boards there, filtering by
> Virtex family...
Hi Chris,
I've been looking a while on the Xilinx site before posting.
All I've seen is that some boards support Virtex 4 LX with
packages FF668 or SF363, but the device we need (that is the
biggest in the Virtex 4 family) makes use of the FF1513
package.
It seems that I have to look for such these boards elsewhere!
Fabrizio
> On Sun, 28 May 2006 2:09 am, Fabrizio Fazzino wrote:
>> Hello guys,
>> I've seen on http://fpga.sunsource.net that the
>> SPARC core of the OpenSPARC T1 can be implemented
>> on the Xilinx XC4VLX200 FPGA.
>>
>> I googled for it but I was unable to find any
>> development board supporting this Virtex 4 chip:
>> are you aware of anything that one could use to
>> prototype it?
--
============================================
Fabrizio Fazzino - fabrizio@f...
Fazzino.IT - http://www.fazzino.it
============================================
|
 |
Browse
