|
Message
From: Chris Palmer<chris@z...>
Date: Sun May 28 11:40:55 CEST 2006
Subject: [oc] Development board for OpenSPARC
Hi...I'm guessing that the part you specified (suffix of "200") is the
smallest in the family that will support the SPARC core. There might be
dev boards with the larger sized chips in that same Virtex family. I'd
start at Xilinx's site and browse the dev boards there, filtering by
Virtex family...
-Chris
On Sun, 28 May 2006 2:09 am, Fabrizio Fazzino wrote:
> Hello guys,
> I've seen on http://fpga.sunsource.net that the
> SPARC core of the OpenSPARC T1 can be implemented
> on the Xilinx XC4VLX200 FPGA.
>
> I googled for it but I was unable to find any
> development board supporting this Virtex 4 chip:
> are you aware of anything that one could use to
> prototype it?
>
> Many thanks in advance,
>
> Fabrizio
>
>
> --
> ============================================
> Fabrizio Fazzino - fabrizio@f...
> Fazzino.IT - http://www.fazzino.it
> ============================================
>
|
 |
Browse
