OPENCORES.ORG


http://www.usb.org/developers/docs/
http://www.usb.org

S.

>
>
> david.bennetot@f... wrote:  Hello!
>
> There is a problem with this IP which is asynchronous :
> for example
>
> "always @(state or rx_valid or rx_active or rx_err or pid_ACK or pid_TOKEN
> or pid_DATA)
> begin .....
> "
>
> I think it's possible to change this part of the code by testing these
> conditions on a falling edge of the clock...
> Maybe I'm totally wrong...
>
> Thanks for your help.
> Best regards
>
> David Bennetot
> _______________________________________________
> http://www.opencores.org/mailman/listinfo/usb
>
> Hi David,
>         Thanks for replying , i understood the problem,  i thank you once
> again ,
>
>        finally can you suggest some sites so that i can learn the conept
> of usb (i.e to get some basic idea) so that i can build a code on
> my own ..
>
>
>   Have a good day,
>   bye
>   Rathnadeep
>
>
> ---------------------------------
> Blab-away for as little as 1¢/min. Make  PC-to-Phone Calls using Yahoo!
> Messenger with Voice._______________________________________________
> http://www.opencores.org/mailman/listinfo/usb

-------------- next part --------------
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message.Global Edge Software Ltd has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. Global Edge Software Ltd reserves the right to monitor and review the content of all messages sent to or from this e-mail address