Message

Reply | Reply all

Date Prev | Date Next | Thread Prev | Thread Next Date Index | Thread Index

From: "Vikas T Rao " <vikasraot@m...>
Date: Wed, 20 Nov 2002 08:19:32 +0530
Subject: Re: [usb] software tool for testing USB device

** Proprietary **

hi,

probably u require windriver's jungo tool. whenever u connect ur device to the USB port of the PC, that tool on PC will identify ur device. ur product & vendor ID will be listed. so u can create an .INF file automatically by selecting ur device in the tool. then it will list down ur endpoints, their direction etc. u can select a particular endpoint and read or write data to it so that ur physical device will get accessed by the host correspondingly. hence u can check the device functionality.

i hope this is what u wanted.

...vikas.

>>> castlecloud2002@i... 11/19/02 09:01PM >>>
Dear gentlemen,

I am developing a generic USB device on FPGA, is there any PC software 
tool which allows me to specific test data patterns through the USB 
port for verification on the bulk, interrupt and ISO endpoints? or simply 
is there any software development tools for USB protocol verification?

Regards,
Eponine