|
Message
From: Jeremy Bennett<jeremy.bennett@e...>
Date: Thu Sep 18 09:18:46 CEST 2008
Subject: [openrisc] Re: [Fwd: ORP in DE1 Board with Linux]
Forwarded on behalf of Pillai, who has been having difficulty posting to
the OpenRISC mailing list.
On Wed, 2008-09-17 at 18:48 -0700, pillai@g... wrote:
> I have send a message to opencores mailing list, but its not seen in
> opencores mails forum. this was my first mail, so not sure whether there
> will be any delay.
There can be a delay before messages are broadcast on the OpenCores
mailing lists. I've reposted this for you.
I see from your company website
(www.gigilogic.com/services/software/gnu-tools-porting) that you are
active contributors to the maintenance of the OpenRISC GNU tool chain
Port. You might like to check with your colleagues involved in this, to
see if their messages are being lost.
> ---------------------------- Original Message ----------------------------
> Subject: ORP in DE1 Board with Linux
> From: pillai@g...
> Date: Wed, September 17, 2008 6:42 pm
> To: openrisc@o...
> --------------------------------------------------------------------------
>
> Hi,
>
> I could get the ORP in Altera DE1 Board. Also able to execute Programs on it.
>
> I would like to know whether i will be able to boot the Linux in this
> setup. This board has got the following Memory resources :
>
> 4MByte Flash
> 512K Bytes SRAM
> 8MByte SDRAM
>
> and Also it has got a SD Card Slot.
>
> What is the Size of Linux image we get with current GNU toolchain
> installation? Will i be able to run Linux on this Board or should go for
> higher configuration?
You should compare this with the memory sizes in the sim.cfg file
distributed with Linux. I believe the figures you quote are all larger,
so you should be OK.
However building the tool chain and Linux takes less than an hour,
particularly since you have experts in house. They should be able to
give you exact figures.
HTH,
Jeremy
--
Tel: +44 (1202) 416955
Cell: +44 (7970) 676050
SkypeID: jeremybennett
Email: jeremy.bennett@e...
Web: www.embecosm.com
|
 |
Browse
