|
Message
From: Jeremy Bennett<jeremy.bennett@e...>
Date: Fri Aug 29 16:29:51 CEST 2008
Subject: [openrisc] Re: You should miss some steps in section 3.7.2
On Fri, 2008-08-29 at 22:17 +0800, yejun.golden wrote:
> Hi, Jerem
>
> I think you should miss some step in section 3.7.2, that is, copy
> or32-uclinux-sim to some directory on the PATH and rename it to sim.
> If you miss these steps, all the test will fail because of 'sim
> command not found'.
Hi Ye Jun,
You are correct, but that is because the Or1ksim tests are very broken.
They should use the simulator command specified in the configuration,
but this is the least of the problems. You will see that they often
report test failures, when the tests have passed. I am also not
convinced that many of the tests even work properly.
I will be doing work on Or1ksim in the coming weeks, to address the most
serious of its problems. At that stage I will probably try to fix the
whole test suite.
ATB,
Jeremy
--
Tel: +44 (1202) 416955
Cell: +44 (7970) 676050
SkypeID: jeremybennett
Email: jeremy.bennett@e...
Web: www.embecosm.com
|
 |
Browse
