|
Message
From: rich_daddio at yahoo.com<rich_daddio@y...>
Date: Wed Jul 30 23:02:10 CEST 2008
Subject: [openrisc] GDB 6.8 for OpenRISC 1000 now available
Hi Jeremy,
Awesome great work and big thanks, I am looking forward to the test
ride!!
Best Regards,
Rich d
----- Original Message -----
From: Jeremy Bennett<jeremy.bennett@e...>
To:
Date: Wed Jul 30 18:19:23 CEST 2008
Subject: [openrisc] GDB 6.8 for OpenRISC 1000 now available
> I have completed the port of GDB 6.8 for the OpenRISC 1000
> architecture.
>
> At present this can be downloaded as a patch from the Embecosm
> website
> (http://www.embecosm.com/download.html). I have included a user
> guide,
> which is in the distribution, but may be viewed online at
> http://www.embecosm.com/downloads/or1k.pdf (PDF) or
> http://www.embecosm.com/downloads/or1k/or1k.html (HTML).
> Making this port uncovered some bugs in the Or1ksim architectural
> simulator. If you wish to use GDB 6.8 with Or1ksim, you will need a
> further patch to remedy these bugs, downloadable from the same
> location.
> The port allows you to load, run, breakpoint and disassemble
> OpenRISC
> 1000 code running on the architectural simulator, or any other
> component
> implementing the OpenRISC remote JTAG protocol. It also provides
> commands to inspect and set Special Purpose Registers (SPRs).
> I would welcome testing and feedback (bugs via the OpenCores
> tracker at
> http://www.opencores.org/ptracker.cgi/list/or1k ). I have only
> verified
> the port so far against the Or1ksim architectural simulator, so
> would
> particularly appreciate testing against real hardware.
> I'll be moving the code to the OpenCores CVS tree in the next few
> days.
> Enjoy!
> Jeremy
> --
> Tel: +44 (1202) 416955
> Cell: +44 (7970) 676050
> SkypeID: jeremybennett
> Email: jeremy.bennett at embecosm.com
> Web: www.embecosm.com
>
>
|
 |
Browse
