OPENCORES.ORG

Actually I find the compiler command using for compile mp3 is :

Hi Anthony,
This is an error message from the Or1ksim saying that it has no memory
at location 80000000, so it can't load your code there. Have you
configured a memory block at that location in your sim.cfg file?

HTH,

Jeremy

-  
Tel:      +44 (1202) 416955
Cell:     +44 (7970) 676050
SkypeID: jeremybennett
Email:   jeremy.bennett@e...
Web:     www.embecosm.com

-----Original Message-----
From: anthonyyi@m...
Reply-To: List about OpenRISC project <openrisc@o...>
To: openrisc@o...
Subject: Re: [openrisc] OR1200 porting MP3 problem
Date: Thu, 10 Jul 2008 05:35:47 +0200 (CEST)

since I have downloaded the new tool chain from opencores web
and run the newest cross compiler in a linux machine
The previous problem have been sloved

However I add something on the xess.ld as follows
 .rodata :
        {
        *(.rodata)
        *(.rodata.str1.1)
        *(.rodata.cst4)
        __etext = . ;
        } > ram
If not add these, the ld will give out some error information
But I don't know whether is rigth to this.
The linker can work correctly and generate the excutable file

Now, the problem is coming when I use simulator:
It will reports that:
ERR: 8-bit program load out of memory area: 80000000
...
ERR: 8-bit program load out of memory area: 80001d08
ERR: 8-bit program load out of memory area: 80001d09
ERR: 8-bit program load out of memory area: 80001d0a
ERR: 8-bit program load out of memory area: 80001d0b
ERR: 8-bit program load out of memory area: 80001d0c
ERR: 8-bit program load out of memory area: 80001d0d

when I use the decompiler to see the asm file
Disassembly of section .text:

80000000 <__start>:
80000000:       9c 61 00 00     l.addi r3,r1,0x0
80000004:       00 00 2a f6     l.j 8000abdc <__uClibc_start>
80000008:       15 00 00 00     l.nop 0x0

8000000c <_report1>:
8000000c:       9c 21 ff e8     l.addi r1,r1,0xffffffe8
80000010:       d4 01 10 00     l.sw 0x0(r1),r2
80000014:       9c 41 00 18     l.addi r2,r1,0x18
80000018:       d7 e2 1f f8     l.sw 0xfffffff8(r2),r3
8000001c:       9c 60 12 34     l.addi r3,r0,0x1234
80000020:       d7 e2 1f f4     l.sw 0xfffffff4(r2),r3
80000024:       84 82 ff f4     l.lwz r4,0xfffffff4(r2)
80000028:       d7 e2 27 fc     l.sw 0xfffffffc(r2),r4

I don't know why this is happen
So any can help
Thank you deeply

----- Original Message ----- 
From: anthonyyi<anthonyyi@m...> 
To: 
Date: Sun Jul  6 10:13:55 CEST 2008 
Subject: [openrisc] OR1200 porting MP3 problem 

> Actually I find the compiler command using for compile mp3 is : 
> or32-rtems-gcc/or32-rtems-as/or32-rtems-sr/ 
> However, I haven't porting the rtems system to my envirment yet( 
> Cgywin in 
> Windows XP) 
> I try to use or32-uclinx-* commands to replace those commands 
> Then it gives out errors as follows: 
> /opt/or32-uclinux/lib/gcc-lib/or32-uclinux/ 
> 3.1/../../../../or32-uclinx/bin/ld: 
> canot find -lc 
> collect2 ld returned 1 exit status 
> make[1]: *** [minmad] errror1 
> BTY, I modified the _ANSI file there is no sys/config.h/ in my 
> directory 
> I think the xess-mad project is porting by the rtems group. 
> Who have complied this project successfully can give me some 
> advice? 
> Thanks a lot 
> Anthony Y 
> make[1]: Leaving directory `/home/new/or1k/mp3/sw/mad-xess' 
> -- 
> View this message in context: 
>
http://www.nabble.com/OR1200-porting-MP3-problem-tp18299825p18299825.html 
> Sent from the OpenCores - RISC mailing list archive at Nabble.com. 
> 
> 
_______________________________________________
http://www.opencores.org/mailman/listinfo/openrisc