|
Message
From: anthonyyi at msn.com<anthonyyi@m...>
Date: Thu Jul 10 05:35:47 CEST 2008
Subject: [openrisc] OR1200 porting MP3 problem
since I have downloaded the new tool chain from opencores web
and run the newest cross compiler in a linux machine
The previous problem have been sloved
However I add something on the xess.ld as follows
.rodata :
{
*(.rodata)
*(.rodata.str1.1)
*(.rodata.cst4)
__etext = . ;
} > ram
If not add these, the ld will give out some error information
But I don't know whether is rigth to this.
The linker can work correctly and generate the excutable file
Now, the problem is coming when I use simulator:
It will reports that:
ERR: 8-bit program load out of memory area: 80000000
...
ERR: 8-bit program load out of memory area: 80001d08
ERR: 8-bit program load out of memory area: 80001d09
ERR: 8-bit program load out of memory area: 80001d0a
ERR: 8-bit program load out of memory area: 80001d0b
ERR: 8-bit program load out of memory area: 80001d0c
ERR: 8-bit program load out of memory area: 80001d0d
when I use the decompiler to see the asm file
Disassembly of section .text:
80000000 <__start>:
80000000: 9c 61 00 00 l.addi r3,r1,0x0
80000004: 00 00 2a f6 l.j 8000abdc <__uClibc_start>
80000008: 15 00 00 00 l.nop 0x0
8000000c <_report1>:
8000000c: 9c 21 ff e8 l.addi r1,r1,0xffffffe8
80000010: d4 01 10 00 l.sw 0x0(r1),r2
80000014: 9c 41 00 18 l.addi r2,r1,0x18
80000018: d7 e2 1f f8 l.sw 0xfffffff8(r2),r3
8000001c: 9c 60 12 34 l.addi r3,r0,0x1234
80000020: d7 e2 1f f4 l.sw 0xfffffff4(r2),r3
80000024: 84 82 ff f4 l.lwz r4,0xfffffff4(r2)
80000028: d7 e2 27 fc l.sw 0xfffffffc(r2),r4
I don't know why this is happen
So any can help
Thank you deeply
----- Original Message -----
From: anthonyyi<anthonyyi@m...>
To:
Date: Sun Jul 6 10:13:55 CEST 2008
Subject: [openrisc] OR1200 porting MP3 problem
> Actually I find the compiler command using for compile mp3 is :
> or32-rtems-gcc/or32-rtems-as/or32-rtems-sr/
> However, I haven't porting the rtems system to my envirment yet(
> Cgywin in
> Windows XP)
> I try to use or32-uclinx-* commands to replace those commands
> Then it gives out errors as follows:
> /opt/or32-uclinux/lib/gcc-lib/or32-uclinux/
> 3.1/../../../../or32-uclinx/bin/ld:
> canot find -lc
> collect2 ld returned 1 exit status
> make[1]: *** [minmad] errror1
> BTY, I modified the _ANSI file there is no sys/config.h/ in my
> directory
> I think the xess-mad project is porting by the rtems group.
> Who have complied this project successfully can give me some
> advice?
> Thanks a lot
> Anthony Y
> make[1]: Leaving directory `/home/new/or1k/mp3/sw/mad-xess'
> --
> View this message in context:
>
http://www.nabble.com/OR1200-porting-MP3-problem-tp18299825p18299825.html
> Sent from the OpenCores - RISC mailing list archive at Nabble.com.
>
>
|
 |
Browse
