|
Message
From: seaman_516 at 163.com<seaman_516@1...>
Date: Tue Dec 18 02:28:08 CET 2007
Subject: [openrisc] quartus&or1200&hello uart
thanks a lot of~~~
it's indeed for me~~
but now i still see the "hello world"on my uart~~why?i dont konw how
to assignment pins (correlation to jtag)...do you help me ?
----- Original Message -----
From: tvaghela at slscorp.com<tvaghela@s...>
To:
Date: Thu Dec 13 05:14:11 CET 2007
Subject: [openrisc] quartus&or1200&hello uart
> Hi,
> You can solve this error by making use of ALTSYNCRAM instead of
> LPM_RAM used in spram and dpram modules of or1200.
> regards,
> KT
> ----- Original Message -----
> From: seaman_516 at 163.com<seaman_516 at 1...>
> To:
> Date: Tue Dec 11 04:36:29 CET 2007
> Subject: [openrisc] quartus&or1200&hello uart
> > Hi,everyone,
> > with the help of <basic custom openrisc system hardware
> > tutorial>wrote
> > by Ing.Patrick Pelgrims,i want to implement "hello
> world"
> > on my UART
> > terminal,but now,some errors puzzled me long long time!
> > can you help me? i am real real need your help!
> > thank you advance!
> > my quentions as follows;
> > 1:in the tutorial,according to author's advise...i do also,but
> when
> > adjusting "or1200_pc.v",there is no
> > "or1200_pc.v" in the source files,so i
> > don't konw how i do ?
> > 2:my tools--quartus II 6.0 and my FPGA type--Cyclone II
> > EP35...484C8.
> > according to the author,i also creat my onchip_ram unit.but
> when
> > compiling all files in quartus II 6.0 ,the errors comeing!!
> > >>Error: Assertion error: Value of LPM_OUTDATA parameter
> > (UNREGISTERED) is not consistent with the use of the outclock
> port
> > >>Error: Can't elaborate user
> > hierarchy
> > "or1200_top:or1200_top|or1200_qmem_top:or1200_qmem_top
> >
>
|or1200_spram_2048x32:or1200_qmem_ram|lpm_ram_dq:lpm_ram_dq_co
>
> > mponent"
> > ,i dont konw how i do?i don't konw where the quensions
> bringing?
> >
> >
>
>
|
 |
Browse
