|
Message
From: rich_daddio at yahoo.com<rich_daddio@y...>
Date: Sat Dec 1 23:48:07 CET 2007
Subject: [openrisc] FPGA Board / Ethernet PHY
Hi Mike,
Do you mean National Semiconductor? I am not sure about uclinux, but
there are lots of 838xx type National Semiconductor devices supported
under linux 2.6.x.
Perhaps you could find something similar and port it if you have or
can get the datasheets. Or maybe somebody on the list has something
for uclinux.
I assume you are using uclinux because you don't want MMU support?
HTH,
Rich d
----- Original Message -----
From: fpga_group at yahoo.de<fpga_group@y...>
To:
Date: Fri Nov 30 17:22:57 CET 2007
Subject: [openrisc] FPGA Board / Ethernet PHY
> Hello,
>
> i am using a board with a Ethernet PHY from National Conductors
> DP83865 and i would like to use the Ethernet MAC with openrisc. Do
> you
> have an idea if this ost working with that Ethernet PHY? because
> almost all xilinx board r using it. And in my uclinux i didnt found
> any
> Ethernet PHy from National Conductors..
> i am using the following board
> XtremeDSP Starter Platform - Spartan-3A DSP 1800A Edition
> Can you please give me any hints regarding this?
> Best regards,
>
> Mike
>
>
>
>
|
 |
Browse
