Message

Reply | Reply all

Date Prev | Date Next | Thread Prev | Thread Next Date Index | Thread Index

From: derick228 at yahoo.com<derick228@y...>
Date: Tue Aug 2 01:51:57 CEST 2005
Subject: [openrisc] GNU Toolchain in rpm format
The 2 errors that I got were:

make[3]: *** [test-filter] Erro/tmp/cca69Sxt.o(.text+0x21): In
function `consume_count':
/usr/src/or1k/b-gcc/libiberty/testsuite/../../../gcc-3.2.3/libiberty/testsuite/.
./cplus-dem.c:535: undefined reference to `_sch_istable'
/tmp/cca69Sxt.o(.text+0xca): In function `consume_count_with_underscores':
/usr/src/or1k/b-gcc/libiberty/testsuite/../../../gcc-3.2.3/libiberty/testsuite/.
./cplus-dem.c:578: undefined reference to `_sch_istable'
/tmp/cca69Sxt.o(.text+0x2c8): In function `cplus_demangle_opname':
/usr/src/or1k/b-gcc/libiberty/testsuite/../../../gcc-3.2.3/libiberty/testsuite/.
./cplus-dem.c:709: undefined reference to `_sch_istable'
/tmp/cca69Sxt.o(.text+0x9e3): In function `cplus_demangle':
/usr/src/or1k/b-gcc/libiberty/testsuite/../../../gcc-3.2.3/libiberty/testsuite/.
./cplus-dem.c:914: undefined reference to `cplus_demangle_v3'
/tmp/cca69Sxt.o(.text+0xa01):/usr/src/or1k/b-gcc/libiberty/testsuite/../../../gc
c-3.2.3/libiberty/testsuite/../cplus-dem.c:921: undefined reference to
`java_dem
angle_v3'
/tmp/cca69Sxt.o(.text+0xb82): In function `ada_demangle':
/usr/src/or1k/b-gcc/libiberty/testsuite/../../../gcc-3.2.3/libiberty/testsuite/.
./cplus-dem.c:1008: undefined reference to `_sch_istable'
/tmp/cca69Sxt.o(.text+0xbb5):/usr/src/or1k/b-gcc/libiberty/testsuite/../../../gc
c-3.2.3/libiberty/testsuite/../cplus-dem.c:1009: undefined reference
to `_sch_is table'
/tmp/cca69Sxt.o(.text+0xc6b):/usr/src/or1k/b-gcc/libiberty/testsuite/../../../gc
c-3.2.3/libiberty/testsuite/../cplus-dem.c:1046:
undefined reference to `_sch_is table'
/tmp/cca69Sxt.o(.text+0x1761): In function `demangle_signature':
/usr/src/or1k/b-gcc/libiberty/testsuite/../../../gcc-3.2.3/libiberty/testsuite/.
./cplus-dem.c:1537: undefined reference to
`_sch_istable'
/tmp/cca69Sxt.o(.text+0x1d9f): In function `demangle_real_value':
/usr/src/or1k/b-gcc/libiberty/testsuite/../../../gcc-3.2.3/libiberty/testsuite/.
./cplus-dem.c:1881: undefined reference to
`_sch_istable'
/tmp/cca69Sxt.o(.text+0x3107):/usr/src/or1k/b-gcc/libiberty/testsuite/../../../g
cc-3.2.3/libiberty/testsuite/../cplus-dem.c:2758:
more undefined references to ` _sch_istable' follow
collect2: ld returned 1 exit status
r 1
make[3]: Leaving directory `/usr/src/or1k/b-gcc/libiberty/testsuite'
make[2]: *** [check-subdir] Error 2
make[2]: Leaving directory `/usr/src/or1k/b-gcc/libiberty'
make[1]: *** [check-libiberty] Error 2
make[1]: Leaving directory `/usr/src/or1k/b-gcc'
make: *** [check] Error 2

which I do not really know what it means.

I tried to use the ATS script, but either I did not compile it right
or something since it just hang up my terminal. Do you have to perform
any extra command line before usint the ATS script?

thanks for your time
Derick

----- Original Message -----
From: Matjaz Breskvar<phoenix@o...>
To:
Date: Fri Jul 29 19:12:08 CEST 2005
Subject: [openrisc] GNU Toolchain in rpm format

> * derick228 at yahoo.com (derick228 at yahoo.com) wrote:
> > I am trying to build the GNU toolchain but without very much
> success.
> > It ran all the way until the end with 2 errors. I have tried
> all the
> > different tutorials with different gcc versions such as
> 2.95.3, 3.1, 3.2.3,
> > 3.4.2 but still no luck. Does anyone happen to have the
> Toolchain in the
> > rpm format?
> what are the errors ? did you try ATS script ?
> > Also when I just the jtag to communicate with an altera board,
> which
> > port should I use? The tutorial here say that jp1 using port
> 9999 is good
> > for a Xilinx board, but how about the Altera board?
> it doesn't matter. this are the ports created by jp1/2 and it
> doesn't matter
> which board you have.
> best regards,
> p.
>
>