|
Message
From: György 'nog' Jeney<nog@s...>
Date: Fri May 20 21:27:22 CEST 2005
Subject: [openrisc] [or1ksim #91] Make the mc peripheral use the new
debugging functions
Hi,Changelog says it all. ChangeLog:
* Make the mc peripheral use the new debugging functions.
nog.
-------------- next part --------------
--- peripheral/mc.c 2005-05-13 22:05:34.000000000 +0200
+++ ../or1ksim-ac/peripheral/mc.c 2005-05-20 21:07:32.000000000 +0200
@@ -43,6 +43,8 @@
#include "sim-config.h"
#include "debug.h"
+DEFAULT_DEBUG_CHANNEL(mc);
+
struct mc_area {
struct dev_memarea *mem;
unsigned int cs;
@@ -108,14 +110,14 @@ void mc_write_word(oraddr_t addr, uint32
struct mc *mc = dat;
int chipsel;
- debug(5, "mc_write_word(%"PRIxADDR",%08"PRIx32")\n", addr, value);
+ TRACE("mc_write_word(%"PRIxADDR",%08"PRIx32")\n", addr, value);
switch (addr) {
case MC_CSR:
mc->csr = value;
break;
case MC_POC:
- fprintf (stderr, "warning: write to MC's POC register!");
+ WARN("warning: write to MC's POC register!");
break;
case MC_BA_MASK:
mc->ba_mask = value & MC_BA_MASK_VALID;
@@ -133,7 +135,7 @@ void mc_write_word(oraddr_t addr, uint32
set_csc_tms (addr >> 3, mc->csc[addr >> 3], mc->tms[addr >> 3], mc);
break;
} else
- debug(1, "write out of range (addr %"PRIxADDR")\n", addr + mc->baseaddr);
+ TRACE("write out of range (addr %"PRIxADDR")\n", addr + mc->baseaddr);
}
}
@@ -143,7 +145,7 @@ uint32_t mc_read_word(oraddr_t addr, voi
struct mc *mc = dat;
uint32_t value = 0;
- debug(5, "mc_read_word(%"PRIxADDR")", addr);
+ TRACE("mc_read_word(%"PRIxADDR")", addr);
switch (addr) {
case MC_CSR:
@@ -163,10 +165,10 @@ uint32_t mc_read_word(oraddr_t addr, voi
else
value = mc->csc[addr >> 3];
} else
- debug(1, " read out of range (addr %"PRIxADDR")\n", addr + mc->baseaddr);
+ TRACE(" read out of range (addr %"PRIxADDR")\n", addr + mc->baseaddr);
break;
}
- debug(5, " value(%"PRIx32")\n", value);
+ TRACE(" value(%"PRIx32")\n", value);
return value;
}
--- support/dbchs.h 2005-05-20 21:05:26.000000000 +0200
+++ ../or1ksim-ac/support/dbchs.h 2005-05-20 21:07:47.000000000 +0200
@@ -29,3 +29,4 @@ DECLARE_DEBUG_CHANNEL(eth)
DECLARE_DEBUG_CHANNEL(config)
DECLARE_DEBUG_CHANNEL(ata)
DECLARE_DEBUG_CHANNEL(gpio)
+DECLARE_DEBUG_CHANNEL(mc)
|
 |
Browse
