|
Message
From: Maria Del Pilar Ortiz, msc-ISLI-IMNS,
200406-200410<s0349769@s...>
Date: Tue Aug 10 11:27:08 CEST 2004
Subject: [openrisc] EXCEPTION: read out of memory
Hi,when i run Linux on the simulator i get the following error: [root@localhost uClinux-2.0.x]# or32-uclinux-sim -f sim.cfg linux
Reading script file from 'sim.cfg'...
WARNING: config.cpu: Invalid parameter: slp; ignoring.
WARNING: config.cpu: Invalid parameter: btic; ignoring.
WARNING: config.cpu: Invalid parameter: bpb; ignoring.
WARNING: config.uart: Invalid parameter: enabled; ignoring.
WARNING: config.dma: Invalid parameter: enabled; ignoring.
WARNING: config.base: Unknown section: tick; ignoring.
WARNING: config.base: Invalid parameter: =; ignoring.
WARNING: config.base: Invalid parameter: irq; ignoring.
Building automata... done, num uncovered: 0/212.
Parsing operands data... done.
loadcode: filename linux startaddr=0 virtphy_transl=0
Not COFF file format
ELF type: 0x0002
ELF machine: 0x8472
ELF version: 0x00000001
ELF sec = 22
Section: .romvec, vaddr: 0xf0000000, paddr: 0xf0000000, offset:
0x00002000, size: 0x00000c14
Section: .text, vaddr: 0xf0002000, paddr: 0xf0002000, offset:
0x00004000, size:
0x00068754
Section: .rodata, vaddr: 0xf006a758, paddr: 0xf006a758, offset:
0x0006c758, size: 0x00006265
Section: .initrd, vaddr: 0xf00709c0, paddr: 0xf00709c0, offset:
0x000729c0, size: 0x00017400
Section: .data, vaddr: 0x00002000, paddr: 0xf0087dc0, offset:
0x0008a000, size:
0x00007424
Section: .ramvec, vaddr: 0x00000000, paddr: 0xf008f1e4, offset:
0x00092000, size: 0x00000c14
0
WARNING: Keyboard has problems with RX file stream.
Resetting PIC.
Resetting memory controller.
OpenRisc 1000 support (C) www.opencores.org
uClinux/OR32
Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne
Calibrating delay loop.. ok - 0.81 BogoMIPS
Memory available: 7904k/8180k RAM, 0k/0k ROM (284k kernel data, 450k code)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
uClinux version 2.0.38.1pre3 (root@l...) (gcc version
3.2.3) #1 Sat Aug 7 22:00:23 BST 2004
Serial driver version 4.13p1 with no serial options enabled
ttyS00 at 0x90000000 (irq = 2) is a 16550A
Ramdisk driver initialized : 16 ramdisks of 2048K size
Blkmem copyright 1998,1999 D. Jeff Dionne
Blkmem copyright 1998 Kenneth Albanowski
Blkmem 0 disk images:
RAMDISK: Romfs filesystem found at block 0
RAMDISK: Loading 93 blocks into ram disk... done.
VFS: Mounted root (romfs filesystem).
EXCEPTION: read out of memory (32-bit access to fffffffc)
I thought there was a problem with the flash memory so i have changed
several times the flash size on sim.cfg and on rom.ld but this doesn't
seem to make any difference.
Do you have any suggestions?
|
 |
Browse
