|
Message
From: "Robert Cragie" <rcc@j...>
Date: Fri, 12 Sep 2003 10:32:44 +0100
Subject: RE: [openrisc] eCos port for openrisc
Although I appreciate that your working release does indeed have value, I
would suggest that effort is put into getting the latest eCos 2.0 up to
date. eCos 1.3.1 is very old and the eCos maintainers have been advising
that this should not be used for quite some time now.
Robert Cragie, Design Engineer
_______________________________________________________________
Jennic Ltd, Furnival Street, Sheffield, S1 4QT, UK
http://www.jennic.com Tel: +44 (0) 114 281 2655
_______________________________________________________________
> -----Original Message-----
> From: owner-openrisc@o...
> [mailto:owner-openrisc@o...]On Behalf Of
> pablo.huerta@a...
> Sent: 12 September 2003 09:37
> To: openrisc@o...
> Subject: Re: [openrisc] eCos port for openrisc
>
>
> I think there isn't yet any operative port of the latest release of
> eCos, but we have a full operative port of eCos 1.3.1. You can
> download it at http://www.teisa.unican.es/~csanchez.
> There you can find also the installation instructions. Note that for
> compiling eCos 1.3.1 port you need gcc 2.95.3, wich you can also
> download from our page, or from OpenCores CVS. You MUST use this
> version of gcc, it won't work with any other release.
>
> If you have any problem with the installation, or if you have any
> doubt, you can contact me at pablo.huerta@a...
>
> Regards,
>
> Pablo Huerta
>
> ----- Original Message -----
> From: "Tomas Jonsson" <toj@s... >
> To: <openrisc@o... >
> Date: Thu, 11 Sep 2003 21:35:41 +0200
> Subject: [openrisc] eCos port for openrisc
>
> >
> >
> >
> > What is the status of the project?
> > Were can I find the latest port of eCos for the openrisc?
> >
> > Best Regards, Tomas Jonsson
> > Silinova AB
> >
>
|
 |
Browse
