OPENCORES.ORG

Hi,

Hi Giuseppe,
some VHDL files are generated during the build. See the FAQ:
http://www.jopwiki.com/FAQ

You have to run part of the make or ant based build process
to generate those files.

Martin

----- Original Message ----- 
From: <peppe_dibella@v...>
To: <cores@o...>
Sent: Wednesday, June 25, 2008 5:45 PM
Subject: [oc] to install jop in spartan 3e

> Hi,
> my name is Giuseppe, I'm a student of the University of Catania in Italy.
> I installed IDE 9.2i and I have to install JOP in Spartan 3e. At the stage 
> of mapping the erro messages are:
> 
> NgdBuild:604 - logical block
>   'cpm_cpu_cmp_core_cmp_stk_cmp_ram_cmp_xram_block' with 
> type 'xram_block'
>   could not be resolved. A pin name misspelling can cause this, a 
> missing edif
>   or ngc file, or the misspelling of a type name. Symbol 'xram_block' is 
> not
>   supported in target 'spartan3'.
> ERROR:NgdBuild:604 - logical 
> block 'cpm_cpu_cmp_core_cmp_fch_cmp_rom' with type
>   'rom' could not be resolved. A pin name misspelling can cause this, a 
> missing
>   edif or ngc file, or the misspelling of a type name. Symbol 'rom' is not
>   supported in target 'spartan3'.
> ERROR:NgdBuild:604 - logical 
> block 'cpm_cpu_cmp_core_cmp_fch_cmp_off' with type
>   'offtbl' could not be resolved. A pin name misspelling can cause this, a
>   missing edif or ngc file, or the misspelling of a type name. 
> Symbol 'offtbl'
>   is not supported in target 'spartan3'.
> ERROR:NgdBuild:604 - logical 
> block 'cpm_cpu_cmp_core_cmp_bcf_cmp_jtbl' with type
>   'jtbl' could not be resolved. A pin name misspelling can cause this, a
>   missing edif or ngc file, or the misspelling of a type name. Symbol 'jtbl' 
> is
>   not supported in target 'spartan3'.
> 
> Partition Implementation Status
> -------------------------------
> 
>  No Partitions were found in this design.
> 
> -------------------------------
> 
> NGDBUILD Design Results Summary:
>  Number of errors:     4
>  Number of warnings:   0
> 
> 
> One or more errors were found during NGDBUILD.  No NGD file will be 
> written.
> 
> Writing NGDBUILD log file "jop.bld"...
> 
> Process "Translate" failed
> 
> 
> I read "An Introduction to the Design Flow for JOP", but for my bad 
> English I could not understand the error.
> 
> Thanks to whoever can help me
> 
> Giuseppe
> _______________________________________________
> http://www.opencores.org/mailman/listinfo/cores