Message

Reply | Reply all

Date Prev | Date Next | Thread Prev | Thread Next Date Index | Thread Index

From: goyal_mukta at rediffmail.com<goyal_mukta@r...>
Date: Wed Sep 19 11:05:59 CEST 2007
Subject: [oc] i2c slave model
Hi Tom,

I am looking for the VHDL code on I2C slave model...I would be glad if
you can share the code.

Thanks & Regards,
Mukta


----- Original Message -----
From: tom.houtmeyers@b...<tom.houtmeyers@b...>
To:
Date: Wed Apr 13 12:38:41 CEST 2005
Subject: [oc] i2c slave model

> Hi,
>
> I am also looking for a I2C slave in VHDL, would it be possible to
> get a
> copy of it?
> Thanks
> Tom.
> ----- Original Message -----
> From: kenneth.l.martin@b...<kenneth.l.martin@b...>
> To:
> Date: Mon Apr 19 20:06:44 CEST 2004
> Subject: [oc] i2c slave model
> > Hi,
> >
> > I need a slave to simulate my Opencore Master I2C design
> against.
> > Can
> > I get a copy of Scott's.
> > ----- Original Message -----
> > From: rchristian@c...
> > To: cores@o...
> > Date: Wed, 8 Oct 2003 19:46:30 +0200
> > Subject: RE: [oc] i2c slave model
> > >
> > >
> > > Not polished is not a problem. I have coded up an I2C
> master
> > for a
> > > design I am working on and am looking for something to
> test it
> > > against.
> > > Is this code still available?
> > >
> > > Ron
> > >
> > > ----- Original Message -----
> > > From: "Morris, Scott J" <morris.scott@p...
> >
> > > To: "'cores@o... '" <cores@o... >
> > > Date: Tue, 29 Oct 2002 12:31:47 -0800
> > > Subject: RE: [oc] i2c slave model
> > >
> > > >
> > > >
> > > > I have a form of a I2C slave in VHDL. It's not in
> the
> > > polished
> > > > state that
> > > > most of the opencore projects are in. And what I
> have is
> > a
> > > > specific
> > > > implementation. I'm using this I2C slave to act as a
> > sentry
> > > or
> > > > gate for
> > > > other I2C components. You send the gate's address
> and the
> > > gate
> > > > connects the
> > > > other I2C devices onto the SDA and SCL lines. It
> > disconnects
> > > the
> > > > devices
> > > > once a stop signal is sent. This allowed me to have
> > several
> > > > identical
> > > > boards, with I2C devices on them, that could be
> > individually
> > > > addressed.
> > > > I've implemented it in a XC9536 and have been able
> to
> > > communicate
> > > > with it.
> > > > It hasn't been rigorously tested and probably won't
> be
> > (at
> > > least
> > > > not by me,
> > > > project was cut back). But you are welcome to have a
> > look.
> > > >
> > > > Scott
> > > >
> > > > > -----Original Message-----
> > > > > From: ckh827@h... [mailto:ckh827@h... ]
> > > > > Sent: Tuesday, October 29, 2002 11:55 AM
> > > > > To: cores@o... > > > > > Subject: [oc] i2c slave model > > > > > > > > > > > > > > > > > > > > > > > > > HI, I need a VHDL version of i2c slave > model(not > > > verilog). > > > > Anybody > > > > > know where I can find it? I tried so hard to > code it > > but > > > has > > > > no > > > > > progress. Any help is appreciated. > > > > > > > > > > > > > > > ken > > > > > > > > > > > > > > > > >

Follow up	Author
[oc] i2c slave model	Frank Buss