Message

Reply | Reply all

Date Prev | Date Next | Thread Prev | Thread Next Date Index | Thread Index

From: yeuchaucheng at gmail.com<yeuchaucheng@g...>
Date: Wed May 16 22:32:01 CEST 2007
Subject: [oc] Question on Ethernet MAC 10/100 Mbps
OK now
I am focus on getting data out for PRSD register in the MIIM and pass it
on to the external memory which will be connect thru Host Interface.

so, what exactly do I need to set, is the Transmit Buffer Descriptor the
only thing I need to set.

if not what else is required in this transmission.

thanks,
Michael
----- Original Message -----
From: Igor Mohor<igor.mohor@g...>
To:
Date: Sun May 13 23:29:08 CEST 2007
Subject: [oc] Question on Ethernet MAC 10/100 Mbps

> MIIM uses 2 signals MDC and MDIO and is used for management
> purposes. You
> can control the PHY with it (mode of operation, link status, etc)
> MII interface is used to transfer the data. And BDs are related to
> this
> operation.
> Regards,
> Igor
> On 5/14/07, attachment-0001.html
>
>