|
Message
From: EPetrichenko at gmail.com<EPetrichenko@g...>
Date: Sun Feb 11 21:02:11 CET 2007
Subject: [oc] SATA to Ethernet
Hello Everyone,Thank you for the responses, we really appreciate it. My senior design
team has taken a look at the Wikipedia link posted and it looks like what
we are trying to do is very similar to what we read. However, we are
not concerned with the total implementation, what we are concerned
with is the bridge from SATA to Ethernet. Perhaps this bridge will be
used in implementing the ATA over Ethernet. The scope of our project
basically ranges from accepting the MAC packets from the Ethernet and
passing it along to an FPGA board using the SATA port. To implement
our project we are planning on using the 1Gb/s opencores version of the
MAC. Sadly we have not yet begun the implementation of the project.
If you need more information please go to our website and look under
the Final Report page:
www.engr.uconn.edu/ece/SeniorDesign/projects/ecesd84
Thank you.
If anyone has any code that can be used to implement this project and
is willing to discuss or provide this information it would be of much use
to us and greatly appreciated. Once again, thank you.
Eric
----- Original Message -----
From: Macakolo<yky2820@y...>
To:
Date: Wed Feb 7 05:54:40 CET 2007
Subject: [oc] SATA to Ethernet
> Hail,
>
> This sounds just the type of solution that I had been searching
> around
> for months. I am working on a FPGA solution which process data and
> want to output ALL data onto a HD but no interface right now.
> If we could have data go through the AOE onto the HDD, which shall
> be
> the simlest way to do!!
> You have any update on your side of this work??
> Thanks,
> ----- Original Message -----
> From: kabbey at biomaps.rutgers.edu<kabbey at b...>
> To:
> Date: Tue Feb 6 02:44:24 CET 2007
> Subject: [oc] SATA to Ethernet
> > Hi,
> >
> > I am interested to use this for a clustered file system. I
> found a
> > good starting point on wikipedia:
> > http://en.wikipedia.org/wiki/Ata_over_ethernet
> > How is this different from what you would like to do?
> > Thanks,
> > Kevin
> > ----- Original Message -----
> > From: H. Peter Anvin<hpa at z...>
> > To:
> > Date: Mon Feb 5 15:56:27 CET 2007
> > Subject: [oc] SATA to Ethernet
> > > epetrichenko at gmail.com wrote:
> > > > My senior design group and I are working on a what
> we
> > call a
> > > "Gigabit
> > > > Ethernet Board", the goal is to extract data
> from
> > the FIS
> > > of the SATA
> > > > data frame and send it to the Ethernet. This
> objective
> > would
> > > have to be
> > > > bidirectional [SATA<->Ethernet]. We are using
> the
> > MAC
> > > code found on
> > > > opencores to implement the gigabit MAC. The
> information
> > in the
> > > FIS of
> > > > the SATA data frame will be MAC data packets.
> > > >
> > > > If anybody has any advice on how to achieve the
> objective
> > or
> > > vhdl
> > > > code that can be reused for our purposes, please
> feel
> > free to
> > > contact
> > > > us.
> > > Are you implementing a bridge from SATA to
> ATA-over-Ethernet?
> > If
> > > so, it
> > > will likely be very useful to a lot of people.
> > > -hpa
> > >
> > >
> >
> >
>
>
|
 |
Browse
