OPENCORES.ORG

Hi John,
This is my board :
http://www.digilentinc.com/Products/Detail.cfm?Nav1=Products&Nav2=Programmable&Prod=S3BOARD
It is fitted with XC3S1000 and this is the only thing which is
different than the standard one. I took ISE Webpack but i need
something to get me started with it and maybe with picoblaze.
Microblaze is too expensive for my budget right now and since this is
only a hobby for me i want to play with picoblaze.
I installed ISE Webpack (man it's HUGE ... !) and i just watch the
whole thing without any clue whatsoever what to do next :D
I just need some simple examples, some tutorial to start my quest.

Thank you for your answer and understanding

LJ> It might help to specify a model number of the board, and try
LJ> searching for that on google.

LJ> Check http://www.digilentinc.com/ site and see if they have any
LJ> documentation for your board.

LJ> Get the ISE Webpack (free) from Xilinx.com.

LJ> Picoblaze will fit easily.  That said, the pinouts of the board are
LJ> fairly important, so you will need to locate the board's
LJ> specifications somewhere...  They might be built into EDK, but that's
LJ> not free.

LJ> -----Original Message-----
LJ> From: cores-bounces@o... [mailto:cores-bounces@o...]
LJ> On Behalf Of Dumitru Stama
LJ> Sent: Friday, January 05, 2007 5:12 AM
LJ> To: cores@o...
LJ> Subject: [oc] Spartan 3

LJ> Hi guys,
LJ> I just bought a Digilent Spartan 3 board with a programming cable and
LJ> a power supply. I have no CD or manual with that and i was wondering
LJ> if you can direct me to a simple tutorial to learn how to actually put
LJ> something in my Spartan XC3S1000. Picoblaze will fit ?

LJ> Thank you in advance for your answers,
LJ> Dumitru

LJ> _______________________________________________
LJ> http://www.opencores.org/mailman/listinfo/cores