|
Message
From: kenneth.l.martin at boeing.com<kenneth.l.martin@b...>
Date: Mon Apr 19 20:06:44 CEST 2004
Subject: [oc] i2c slave model
Hi,I need a slave to simulate my Opencore Master I2C design against. Can
I get a copy of Scott's.
----- Original Message -----
From: rchristian@c...
To: cores@o...
Date: Wed, 8 Oct 2003 19:46:30 +0200
Subject: RE: [oc] i2c slave model
>
>
> Not polished is not a problem. I have coded up an I2C master for a
> design I am working on and am looking for something to test it
> against.
> Is this code still available?
>
> Ron
>
> ----- Original Message -----
> From: "Morris, Scott J" <morris.scott@p... >
> To: "'cores@o... '" <cores@o... >
> Date: Tue, 29 Oct 2002 12:31:47 -0800
> Subject: RE: [oc] i2c slave model
>
> >
> >
> > I have a form of a I2C slave in VHDL. It's not in the
> polished
> > state that
> > most of the opencore projects are in. And what I have is a
> > specific
> > implementation. I'm using this I2C slave to act as a sentry
> or
> > gate for
> > other I2C components. You send the gate's address and the
> gate
> > connects the
> > other I2C devices onto the SDA and SCL lines. It disconnects
> the
> > devices
> > once a stop signal is sent. This allowed me to have several
> > identical
> > boards, with I2C devices on them, that could be individually
> > addressed.
> > I've implemented it in a XC9536 and have been able to
> communicate
> > with it.
> > It hasn't been rigorously tested and probably won't be (at
> least
> > not by me,
> > project was cut back). But you are welcome to have a look.
> >
> > Scott
> >
> > > -----Original Message-----
> > > From: ckh827@h... [mailto:ckh827@h... ]
> > > Sent: Tuesday, October 29, 2002 11:55 AM
> > > To: cores@o...
> > > Subject: [oc] i2c slave model
> > >
> > >
> > >
> > >
> > > HI, I need a VHDL version of i2c slave model(not
> verilog).
> > Anybody
> > > know where I can find it? I tried so hard to code it but
> has
> > no
> > > progress. Any help is appreciated.
> > >
> > >
> > > ken
> > >
> >
>
|
 |
Browse
