|
Message
From: Martin.J Thompson<Martin.J.Thompson@T...>
Date: Mon Mar 29 10:36:21 CEST 2004
Subject: [oc] Wishbone Spec - use of CYC signal
Hi all,We've been poring over the Wisbone spec (revision B3) and are confused by the Examples in the appendix...
RULE 3.30 states that slaves should only respond to inputs when CYC is asserted.
The examples in Appendix 6 don't show the use of CYC to qualify anything - are they therefore non-wishbone compliant? I ask because our processor to WB bridge generates STBs for every processor access to its external bus (whetehr or not they are targetted at us) and I'm worried that if the open cores blocks have been designed with the A6 examples rather than to the spec they will fail as they will see lots of strobes which they should be ignoring, but won't!
Thanks,
Martin
--
Martin Thompson CEng MIEE
TRW Conekt
Stratford Road, Solihull, B90 4GW. UK
Tel: +44 (0)121-627-3569 - martin.j.thompson@t...
|
 |
Browse
